22-Channel 12G Custom Design Transmission Fiber Kits With XLR Audio and 1GB Ethernet

$9,772.59 USD

~~$0.00 USD~~ $9,772.59 USD

Sale Ausverkauft

SPECIFICATIONS

Brand Name: NONE,Ho- Link

Certification: CE RoHS FCC

Fiber connector: LC

High-concerned chemical: none

Item Type: cable

Model Number: HL-S12G-22XLR1G

Optical module paramete: Single fiber single mode 10km

Origin: Mainland China

Power Supply: AC100-240V

Warranty Time: 3 years

Wavelength: 1550-1310nm

power Dissipation: <15W

22-Channel 12G Custom Design Transmission Fiber Kits With XLR Audio and 1GB Ethernet

Contact Lari directly with any requirements — there may be a surprise!

WhatsApp/Wechat: +86 158 7552 0146

Email: sales01@holinktech.com

Function

1. 16x 12G-SDI In

2. 6x 12G-SDI Out

3. 2x XLR In
4. 2x XLR Out

5. 4x 1GB Ethernet (Isolated)

6. Pathological Patterns

7. LC Fiber Connector

Features

Video 

 * Compliant with DVB-ASI, SMPTE424M, SMPTE292M, SMPTE259M(C) standards
 * Using full digital processing technology, the image is clear, no color phase difference
 * With APC circuit, constant output optical power, large dynamic range
 * CWDM technology realizes multi-channel signal transmission, large capacity and easy to upgrade
 * The inputs are cable equalized to compensate for cable transmission losses
 * An output clock recovery circuit is provided to reduce signal jitter, which enables good handling of distorted signals
 * Input/output cable transmission distance up to 80m (BELDEN8281 cable)


XLR Audio 
Number of Channels: 2 Bidi
Input Connector: XLR (Female).
Output Connector: XLR (Male).
Input / Output Impedance: 600 Ohm.
Max input/output voltage: 4.0Vp-p.
Signal level: 0.5-4Vp-p.
Sampling frequency: 192 KHz.
SNR: 100dB.
Audio interface level III lightning protection, reaching IEC61000-4-5 (8/20 μ s) Differential mode: 6KV.


Others
 * Transmission distance 10KM
 * LED status indicator to monitor the operating status of the unit
 * Plug and play, no setup required
 * The devices are used in pairs, note that the devices are distinguished between transmitters and receivers

Specifications

Fiber Index
Wavelength	1310/1550nm
Rate	12G bps
Tx power	＞-6db
Rx sensitivity	＞-14db
Fiber connector	LC as default, SC/FC/ST option
Video Index
Signal type	SMPIE 424M
Work standards	DVB-ASI 、SMPTE259M-C、SMPTE292M、SMPTE424M
Bit rates	270 Mbps, 1.485 Gbps, 2. 97Gbps
Video Input / Output
Signal type	1 single-link
Input impedance	75 Ohm
Enter the automatic cable equalization	>80m (1. 485 Gbps@BELDEN8281 cable)
Clock recovery	270 Mbps, 1. 485 Gbps, and 2. 97Gbps are automatic, the others are bypass
Input level	800mVp-p±10%
Enter the echo loss	＞10dB @ 2. 97 Gbps
Output DC offset	<±0. 5V
Output echo loss	＞10dB @ 2. 97 Gbps
The biggest shake	＜0. 1UI(1485Mbps)
Signal overshoot	＜5% (1485Mbps)
Equipment Information
The shell metal	Aluminium alloy
Way to install	Rack-mounted
Product net weight (unit: pair)	15KG
Product weight (including the outer packaging)	18KG
Input voltage	AC 100~240V 50/60Hz
Power dissipation	＜15W
Overload protection	provide
Over current protection	provide
Other indexes
Operating temperature	-20°C ~75°C
Storage temperature	-40°C ~85°C
Relative humidity	From 5% to 95% (non-condensing)
Working life	> 100,000 hours

Picture

Application

1. SMPTE is compatible with a serial digital interface

2.UHDTV/4K/8K/HDTV/SDTV video

3. IP media gateway

4. Digital video processing and editing

Connection Diagram Reference

Attention

Lightning protection, static electricity and grounding:

It is recommended that when install the device, consideration should be given to the impact of grounding by lightning, and take prevention measures. Strong static electricity will damage the optical device and data chip in the equipment. It is recommended that when plug/unplug the data port of the optical converter, please disconnect the power supply of the optical converter first.

Fiber and optical components:

Be careful when plugging the optical fiber as optical components of the optical converter is very fragile, and it should avoid causing damage to the optical components. It should be noted that the light source produced by the optical components of the optical converter will be harmful to eyes, so do not have a direct eye with the optical components of optical converter. If you need to detect the optical power of the optical converter, please use the optical power meter.

Equipment and installation procedures:

1. Optical fiber installation: please carefully insert the optical fiber into the optical fiber interface of the optical terminal after confirming that the optical fiber link meets the installation requirements.

2. Equipment installation: The equipment can be distinguished between transmitter and receiver, and it is stated clearly on the label and printed on the chassis of the equipment.

Package Reference